- Automatic reference position return check command -G28,G29,G30
- Skip function -G31
- Threading -G33
- Automatic tool length measurement -G37
- Cutter compensation B -G41, G42, G39
- 3-dimensional tool compensation -G41
- Wheel wear compensation -G41
- Tool offset -G45 to G48
- Local coordinate system -G52
- Positioning in the machine coordinate system -G53
- Workpiece coordinate system -G54 to G59,G54.1
- Rotary table dynamic fixture offset -G54.2
- Single direction positioning -G60
- Automatic corner override -G62
- Tapping mode -G63
- Macro call -G65, G66, G67
(SubProgram call is available))
- Figure copying -G72.1, G72.2
- Simple electric gear box -G80, G81
- Functions for hobbing machine -G80, G81
- External operation function -G81
- Chopping function -G81.1
- Small hole peck drilling cycle -G83
- Workpiece coordinate system setting -G92
- Workpiece coordinate preset -G92.1
- Feed per revolution -G95
- Constant surface speed control -G96, G97
- Infeed control -G160, G161
- Unavailable functions
The following functions can not be used in Nano smoothing mode.
・Flexible synchronous control
・Twin table control
・Spindle Positioning
・Sequence number comparison and stop
It is not possible to stop by the sequence number in Nano smoothing mode.
・Index table indexing
・Retrace function
Do not use retrace function in the program which uses Nano smoothing mode.
・Rotary axis control
・Gentle curve normal direction control
Edit
Apprv.
Desig.
Sheet
Title
Draw
No.
Date
Design
Descri
tion
Date
FANUC Series 16i–MB, 18i–MB, 18i–MB5
Nano Smoothing Specification
Dec.27.2001
Sheet
T.Horie
9/14
A-78975E