PROGRAMMING
13. FUNCTIONS TO SIMPLIFY
PROGRAMMING
B–63534EN/02
224
In the canned cycle mode, specify the subprogram call command M98P_
in an independent block.
Z–axis feedrate 1000 mm/min
Spindle speed 1000 min
-1
Thread lead 1.0 mm
<Programming of feed per minute>
G94 ; Specify a feed–per–minute command.
G00 X120.0 Y100.0 ; Positioning
M29 S1000 ; Rigid mode specification
G84 Z–100.0 R–20.0 F1000 ; Rigid tapping
<Programming of feed per revolution>
G95 ; Specify a feed–per–revolution command.
G00 X120.0 Y100.0 ; Positioning
M29 S1000 ; Rigid mode specification
G84 Z–100.0 R–20.0 F1.0 ; Rigid tapping
D Subprogram call
Examples