PROGRAMMING
B–63534EN/02
22. RISC PROCESSOR
605
NoteSpecificationsItem
Miscellaneous/spindle functions
Miscellaneous function The AI high precision contour control
mode or the AI nano high precision
contour control mode is automatically
canceled once and the buffering is in-
hibited if this function is used in the AI
high Precision Contour Control mode
or in the AI high Precision Contour
Control mode.
2nd. Auxiliary function The AI high precision contour control
mode or the AI nano high precision
contour control mode is automatically
canceled once and the buffering is in-
hibited if this function is used in the AI
high Precision Contour Control mode
or in the AI high Precision Contour
Control mode.
1 block plural M commands The AI high precision contour control
mode or the AI nano high precision
contour control mode is automatically
canceled once and the buffering is in-
hibited if this function is used in the AI
high Precision Contour Control mode
or in the AI high Precision Contour
Control mode.
It is possible to command up to 3.
Spindle speed function The AI high precision contour control
mode or the AI nano high precision
contour control mode is automatically
canceled once and the buffering is in-
hibited if this function is used in the AI
high Precision Contour Control mode
or in the AI high Precision Contour
Control mode.
Tool functions
Tool function (T8–digit) The AI high precision contour control
mode or the AI nano high precision
contour control mode is automatically
canceled once and the buffering is in-
hibited if this function is used in the AI
high Precision Contour Control mode
or in the AI high Precision Contour
Control mode.
Tool length compensation G43
Cutter compensation G38,G39,G40,G41,G42 The buffering is inhibited when the
command which automatically cancel
AI high precision contour control mode
or AI nano high precision contour con-
trol mode is used.
So the tool offset vector is held.