OPERATION8. DATA INPUT/OUTPUT B–63534EN/02
934
Parameter output
The file (NC parameter) in the CNC memory can be output to the host
computer.
1 Place the CNC in the EDIT mode.
2 Press the function key
SYSTEM
.
3 Press the continuous menu key at the right end of the soft key display.
4 Press the [PARAM] soft key. The parameter screen appears.
5 Press the [(OPRT)] soft key.
6 Press the continuous menu key at the right end of the soft key display.
7 Press the [PUNCH] soft key.
8 Press the [EXEC] soft key.
9 During output, “OUTPUT” blinks in the lower–right corner of the
screen.
The fixed file name PRAMETER is used.
Refer to the operator’s manual of each CNC.
Tool offset value input
The file (tool offset value) on the host computer can be input to the CNC
memory.
1 Place the CNC in the EDIT mode.
2 Press the function key
OFFSET
SETTING
.
3 Press the continuous menu key at the right end of the soft key display.
4 Press the [OFFSET] soft key. The tool compensation screen appears.
5 Press the [(OPRT)] soft key.
6 Press the continuous menu key at the right end of the soft key display.
7 Press the [READ] soft key.
8 Press the [EXEC] soft key.
9 During input, “INPUT” blinks in the lower–right corner of the screen.
The fixed file name TOOLOFS is used.
Refer to the operator’s manual of each CNC.
Procedure
File name
File format, restrictions
Procedure
File name
File format, restrictions