A. PARAMETERS
B–62443EN–2/03
142
This section lists parameters classified according to functions.
For details of each parameter, refer to the following CNC parameter
manuals :
FANUC Series 16/18
PARAMETER MANUAL (B-61810E)
FANUC Series 16/18/160/180–MODEL B
PARAMETER MANUAL (B-62450E)
FANUC Series 16i/18i/160i/180i–MODEL A
PARAMETER MANUAL (B-63010EN)
FANUC Series 16/18/160/180–MODEL C
PARAMETER MANUAL (B-62760EN)
FANUC Series 21/210
PARAMETER MANUAL (B-62710EN)
FANUC Series 21i/210i–MODEL A
PARAMETER MANUAL (B-63090EN)
1. Parameters related to the reader/punch interface (RS–232C)
2. Parameters related to program editing
3. Parameter related to external data input/output
4. Parameters related to controlled axes
5. Parameters related to the increment system
6. Parameters related to the coordinate system
7. Parameters related to rotation axes
8. Parameters related to return to the reference position
9. Parameters related to manual operation (jog)
10. Parameter related to cutting feed
11. Parameters related to rapid traverse
12. Parameters related to dry run
13. Parameters related to acceleration/deceleration
14. Parameters related to PMC axis control
15. Parameters related to manual handle feed
16. Parameters related to backlash
17. Parameters related to in–position check
18. Parameters related to interlock
19. Parameters related to stroke limit
20. Parameters related to the servo system
21. Parameters related to the absolute pulse coder
22. Parameters related to excessive errors
23. Parameters related to the CRT/MDI
24. Parameters related to display
25. Parameters related to DI/DO signals
26. Parameters related to clear and reset
27. Parameters related to miscellaneous functions
28. Parameter related to skip
29. Parameters related to macros
30. Parameters related to the position switch
31. Parameter related to DI/DO on the loader control board
32. Parameters related to multipath control
A.1
PARAMETERS
CLASSIFIED
ACCORDING TO
FUNCTIONS