
A-78395E
Edit
Apprv
ApprvApprv
Apprv.
..
.Desig
DesigDesig
Desig.
..
.
Sheet
Title
Draw
No.
32/75
Date
DateDate
Date
Design
DesignDesign
Design
Descri
tion
Descri
tionDescri
tion
Descri
tion
Date
DateDate
Date
FANUC Series 16
i
/18
i
-TA/TB
Specifications of High-Precision Contour
Control forComplex Lathe
2001.02.14 A.Fukumoto
02 2001.10.04
Description of Cs axis and rotary axis are added.
2.15 Relation between high-precision contour control and another functions
•
••
•
Function which cannot be used with HPCC
The following funtions can not be used in HPCC mode.
• Sequence Number Comparison and Stop
It is not possible to stop by the sequence number in the HPCC mode.
• Manual handle retrace
• Tool life management
Please do not instruct related to the tool life management.
• Macro executor (execution macro)
The following function is used and busy cannot use a HPCC. Moreover, these function cannot
be used in the HPCC mode.
• Simple synchronous control
• B-axis control
• Synchronous control and composite control (Two-path control)
However, only Cs axis is possible the composite control.
• Superimposed Control
•
••
•
Function which cannot be instructed in HPCC mode
The following funtions can not be commanded in HPCC mode. Moreover, do not instruct in a
HPCC in the mode of the function of * mark.
(In the [ ] means G code system B or C)
Please refer to "7. The function table which can be used by a high-precision contour control"
for the function which can be used. Functions other than being described there cannot be
used.
• Custom macro B
• Interruption type custom macro
• Dwell -G04
• High speed cutting* -G05(Except G05P0)
• Hypothetical axis interpolation* -G07
• Cylindrical interpolation* -G07.1
• Look-ahead control -G08
• Tool retract & recover -G10.6
• Polar coordinate interpolation* -G12.1,G13.1
• Stored stroke check 2 on/off -G22,G23
• Spindle speed fluctuation detection on/off -G25,G26
• Reference position return check -G27
• Return to reference position -G28
• 2nd, 3rd and 4th reference position return -G30
• Floating reference point return -G30.1
• Skip function -G31
• Thread cutting* -G32[G33]
• Variable–lead thread cutting* -G34
• Circular threading * -G35,G36
• Automatic tool compensation -G36,G37(G37.1,G37.2)
• Coordinate system setting or
Max. spindle speed setting -G50[G92]
• Polygonal turning * -G50.2,G51.2
• Workpiece coordinate system preset -G50.3[G92.1]
• Local coordinate system setting -G52
• Machine coordinate system setting -G53
• Workpiece coordinate system selection -G54∼G59,G54.1 P__
• Single direction positioning -G60