
A-78395E
Edit
Apprv
ApprvApprv
Apprv.
..
.Desig
DesigDesig
Desig.
..
.
Sheet
Title
Draw
No.
59/75
Date
DateDate
Date
Design
DesignDesign
Design
Descri
tion
Descri
tionDescri
tion
Descri
tion
Date
DateDate
Date
FANUC Series 16
i
/18
i
-TA/TB
Specifications of High-Precision Contour
Control forComplex Lathe
2001.02.14 A.Fukumoto
02 2001.10.04
Description of Cs axis and rotary axis are added.
8456 Area–2 override
[Data type]
Word
[Unit of data]
%
[Valid data range]
0 to 100 (Standard setting: 80)
This parameter specifies an override in area 2 of velocity calculation considering the cutting
load.
8457 Area–3 override
[Data type]
Word
[Unit of data]
%
[Valid data range]
0 to 100 (Standard setting: 70)
This parameter specifies an override in area 3 of velocity calculation considering the cutting
load.
8457 Area–4 override
[Data type]
Word
[Unit of data]
%
[Valid data range]
0 to 100 (Standard setting: 60)
This parameter specifies an override in area 4 of velocity calculation considering the cutting
load.
#7 #6 #5 #4 #3 #2 #1 #0
8459 OVR CTY CDC
[Data type]
Bit
CDC
Be sure to set this value to 0.
CTY
Be sure to set this value to 1.
OVR
In the HPCC mode, override to determined feedrate by automatic feedrate control is
0: Not effective
1: Effective
When this parameter is set “1”, override becomes effective for the following feedrate.
· Feedrate which determined based on a feedrate difference along each axis.
· Feedrate which determined based on acceleration along each axis.
· Feedrate which determined based on an allowable acceleration during circular interpolation.
· Maximum feedrate of automatic feedrate control function.
Maximum cutting feedrate (parameter No.1422 or No.1430 or No.1432) is never exceeded
even when override is effective.