12. DISPLAY/SET/EDIT
B--63003EN--1/02
1030
The help function displays on the screen detailed information about
alarms issued in the CNC and about CNC operations. The following
information is displayed.
When the CNC is operated incorrectly or an erroneous machining
program is executed, the CNC enters the alram state. The help screen
displays detailed information about the alarm that has been issued and
how to reset it. The detailed information is displayed only for a limited
number of P/S alarms. These alarms are often misunderstood and are
rather difficult to understand.
If you are not sure about a CNC operation, refer to the help screen for
information about each operation.
When setting or referring to a system parameter, if you are not sure of the
number of the parameter, the help screen displays a list of parameter Nos.
for each function.
NOTE
The user cannot switch the screen display from the PMC
screen or CUSTOM screen to the help screen.
Series
16i/160i/18i/180i
OPERATOR’S MANUAL
(For Machining Center)
(B--63014EN)
III.13 HELP FUNCTION
OPERATOR’S MANUAL
(For Lathe) (B --63004EN)
III.13 HELP FUNCTION
Series 21i/210i
OPERATOR’S MANUAL
(For Machining Center)
(B--63094EN)
III.13 HELP FUNCTION
OPERATOR’S MANUAL
(For Lathe) (B --63084EN)
III.13 HELP FUNCTION
Series 20i
OPERATOR’S MANUAL
(For Milling) (B--63384EN)
III.15 HELP FUNCTION
OPERATOR’S MANUAL
(For Lathe) (B --63374EN)
III.15 HELP FUNCTION
12.1.3
Help Function
General
D Detailed information of
alarms
D Operation method
D Pa ra me ter table
Note
Reference item