12. DISPLAY/SET/EDIT
B--63003EN--1/02
1046
O1126 N01126
F.ST STOP REWIND
A.ST
SOLID GRAPHIC (EXECUTION)
Z
Y
X
Part Machined
The background graphic function allows a programmed tool path to be
drawn on the screen while machining is being performed by another
program.
When the background graphic mode is set, the previously selected
program remains selected. The tool path of a desired program can be
drawn on the background graphic screen.
The parameters used in actual machining are also used in background
graphicmode. Setting and drawing with the background graphic function
are the same as with the dynamic graphic display function.
[Classification] Output signal
[Function] Indicates that a dynamic graphics display (animated graphics display) is
being drawn for check purposes.
[Operation] The signal becomes 1 when:
D Check drawing begins.
The signal becomes 0 when:
D A reset occurs after check drawing has ended.
#7
F062
#6 #5
CKGRP
#4 #3 #2 #1 #0
Background graphic
(M series)
Signal
Check
drawing--under--way
signal
CKGRP <F062#5>
Signal address