B--63003EN--1/02
1. AXIS CONTROL
4
Number Message Description
015
TOO MANY AXES COM-
MANDED
(M series)
The number of the commanded axes
exceeded that of simultaneously con-
trolled axes. Correct the program.
TOO MANY AXES
COMMANDED
(T series)
An attempt was made to move the ma-
chine along the axes, but the number of
the axes exceeded the specified num-
ber of axes controlled simultaneously.
Alternatively, in a block where the skip
function activated by the torque--limit
reached signal (G31 P99/P98) was
specified, either moving the machine
along an axis was not specified, or
moving the machine along multiple
axes was specified. Specify movement
only along one axis.
NOTE
When the 9” CRT is fitted, the overall position display screen
and the position display screen for manual handle interrupt
can display up to eight axes. The positions of the 9th and
10th axes are not displayed on these screens when used
with 2--path control having nine or more axes.
Series
16i/160i/18i/180i
OPERATOR’S MANUAL
(For Machining Center)
(B--63014EN)
II.2.1 Controlled Axes
OPERATOR’S MANUAL
(For Lathe) (B --63004EN)
II.2.1 Controlled Axes
Series 21i/210i
OPERATOR’S MANUAL
(For Machining Center)
(B--63094EN)
II.2.1 Controlled Axes
OPERATOR’S MANUAL
(For Lathe) (B --63084EN)
II.2.1 Controlled Axes
Series 20i
OPERATOR’S MANUAL
(For Milling) (B--63384EN)
II.2.1 Controlled Axes
OPERATOR’S MANUAL
(For Lathe) (B --63374EN)
II.2.1 Controlled Axes
Alarm and message
Note
Reference item