B--63003EN--1/02
11. PROGRAM COMMAND
943
#7 #6 #5 #4 #3 #2 #1 #0
3104 MCN
[Data type] Bit
MCN Machine position is:
0 : Not displayed according to the unit of input.
(Regardless of whether input is made in mm or inches, the machine
position is displayed in mm for millimeter machines, or in inches for
inch machines.)
1 : Displayed according to the unit of input.
(When input is made in mm, the machine position is displayed in mm,
and when input is made in inches, the machine position is displayed in
inches accordingly.)
#7 #6 #5 #4 #3 #2 #1 #0
3405 AUX
[Data type] Bit
AUX The least increment of the command of the second miscellaneous function
specified with a decimal point
0: Assumedtobe0.001
1 : Depending on the input increment.
(For input in mm, 0.001 is assumed, or for input in inches, 0.0001 is
assumed.)
#7 #6 #5 #4 #3 #2 #1 #0
5006 OIM
[Data type] Bit
OIM When the unit is switched between the inch and metric systems, automatic
tool compensation value conversion is:
0 : Not performed
1 : Performed
NOTE
If you change this parameter, re--set the tool compensation
data.
#7 #6 #5 #4 #3 #2 #1 #0
8003 PIM
[Data type] Bit
PIM When only the axes controlled by the PMC are used, the linear axis is:
0 : Influenced by inch/millimeter input.
1 : Not influenced by inch/millimeter input.