6/10
PAGEEDT.
DATE
DESIGN
DESCRIPTION
TITLE
No.
FANUC Series 16i/18i/21i/20i/160i/180i/210i/-MODEL A
CONNECTION MANUAL (FUNCTION)
Concerning the addition of Tool Offset Pairs (400)
and Tool Offset Pairs (999)
B-63003EN-1/02-05
DS0100-04
01 01.02.23 Newl
Re
istered
4. Input of Tool Offset Value Measured B
In the input of tool offset value measured B function, OFN0 to OFN5(G0039#0 to #5) and OFN6
to OFN9(G0040#0 to #3) are used for the tool offset number select signal.
Moreover, the parameter No.5020 and No.5053 are invalid. Use the parameter No. 5023 and
No.5052.
< Parameter >
5023
Tool offset number used for the input of tool offset value measured B
(For tool offset 400 and 999)
[Data type] Word type
[Valid data range] 0 to the number of tools to be compensated.
Set tool offset number used for the input of tool offset value measured B
function (i.e. when workpiece coordinate system shift value is set). (The
tool offset number corresponding to the measured tool shall be set in
advance.)
Note1) This parameter is valid when the tool offset 400 pairs or 999 pairs is available
Note2) This parameter is valid when the tool offset number is not automatically selected
(No.5005#5(QNI) is zero).
5052
Bias for tool offset numbers for measured tool offset value setting
(For tool offset 400 and 999)
[Data type] Word type
[Valid data range] 1 to maximum tool offset count.
When the tool setter function for 1–turret, 2–spindle lathes is used, this
parameter allocates tool offset numbers for measured tool offset
measurement values to spindle 1 and spindle 2.
If 0 is set for this parameter, or if the maximum tool offset count is
exceeded, the following is assumed:
Tool offset number
99 pairs
(O2DGT=1)
400 pairs 999 pairs
Spindle 1 1 to 49 1 to 200 1 to 499
Spindle 2 50 to 99 201 to 400 500 to 999
Note1) This parameter is valid when the tool offset 400 or 999 function is available.