B-70315EN/02 APPENDIX E.PARAMETER LIST
- 305 -
E.4 PARAMETERS FOR EDGE MACHINING CONDITIONS
15050 Edge detection angle
[Data type] Word
[Unit of data] deg
[Valid data range] 0 to 180
A corner is assumed to be present when the angle formed by two
blocks is smaller than the specified angle.
15051 Peak piercing power value
[Data type] Word
[Unit of data] W
[Valid data range] 0 to 7000
Set a peak power value for piercing to be performed at the top of a
corner.
15052 Piercing pulse frequency
[Data type] Word
[Unit of data] Hz
[Valid data range] 5 to 2000
Set a pulse frequency for piercing to be performed at the top of a
corner.
15053 Piercing pulse duty ratio
[Data type] Word
[Unit of data] %
[Valid data range] 0 to 100
Set a pulse duty ratio for piercing to be performed at the top of a
corner.
15054 Piercing time
[Data type] 2-word
[Unit of data] msec
[Valid data range] 0 to 99999999
Set a piercing time used for piercing to be performed at the top of a
corner.
15055 Piercing assist gas pressure
[Data type] Word
[Unit of data] 0.01MPa or 0.1 kg/cm
2
[Valid data range] 0 to 255
Set an assist gas pressure for piercing to be performed at the top of a
corner.