B-70315EN/02 SAFETY PRECAUTIONS
s-7
CAUTION
1 The oscillator is controlled according to the CNC internal
parameter settings. If a numeric value different from a
setting is entered and the oscillator is operated, the
oscillator may malfunction. In the worst case, the oscillator
may be damaged.
2 Use laser gas with the specified correct composition ratios.
If you use laser gas with different specifications by mistake,
performance degradation or an alarm will result. In the
worst case, the oscillator may be damaged.
3 If storing the laser oscillator for a long time or leaving it
unused for a long time, drain the inside of the oscillator.
Otherwise, corrosion and clogging may result.
Also drain the oscillator if it is likely to freeze in winter. If it
freezes, the water piping and cooling system components
will be damaged.
NOTE
Do not discard a used output mirror or focusing lens
together with regular waste. If the output mirror or focusing
lens is replaced, return the original to the supplier or
entrust it to a specialized disposal company.