
B-63423EN/02 USER PROGRAM 3. CREATING LOADING FILES
-7-
3.1 MACRO LIBRARY COMPONENTS
The macro library comes in three floppy disks as shown below.
1) Disk 1:
<1> BJ41.PG1 to BJ41.PG3
Object files used to create a load module file for the MANUAL
GUIDE system (the load module file is hereinafter referred to as a
"MANUAL GUIDE control module")
2) Disk 2:
<1> BJ41.PG4
Object file used to create a MANUAL GUIDE control
module
<2> DUMMY.REL
Object file used to create a MANUAL GUIDE control
module
<3> BJ41.LNK
Link control file used to create a MANUAL GUIDE control
module
<4> M_STUP.SRC
Source file for a macro program that defines the screen
layout (required when the measurement cycle option is
provided)
<5> PROC8.SRC, PROC9.SRC
Source files for macro programs that define the process data
(required when the measurement cycle option is provided)
<6> M_STR*3.SRC, STRING*8.SRC, STRING*9.SRC
Source files for macro programs that define the strings
(required when the measurement cycle option is provided)
<7> FIG8.SRC, FIG9.SRC, FIGSUB8.SRC, FIGSUB9.SRC
Source files for macro programs for guidance drawing
figures (required when the measurement cycle option is
provided)
<8> CHECK8.SRC, CHECK9.SRC
Source files for macro programs for checking input
completion (required when the measurement cycle option is
provided)
<9> MEASURE.SRC
Source file for a macro program for machining macros
(required when the measurement cycle option is provided)