
9. USER PROGRAMS FOR DISPLAYING GUIDANCE DRAWING FIGURE
USER PROGRAM B-63423EN/02
-66-
Especially for Guidance Cutting, in order to support an operator’s
handling, some guidance drawings are prepared. Basically their
standard program are prepared, but they can be modified by MTB for
their own purpose.
The number of this user program is fixed as follows.
Program NO. Content of drawing
O9804 Data items for Line form
O9809 Data items for Circle form
O9802 Approach/Along cutting and guidance handwheel
direction for Line cutting
O9807 Approach/Along cutting and guidance handwheel
direction for Circle cutting