
B-63423EN/02 USER PROGRAM
9. USER PROGRAMS FOR DISPLAYING GUIDANCE DRAWING FIGURE
-67-
9.3 NOTES ON CREATING GUIDANCE DRAWING FIGURES
1) A macro program for guidance drawing figures is started twice
each time the cursor moves on the data input screen. Therefore,
no operation should be performed upon the first startup of the
program, and a guidance drawing figure should be created only
upon the second startup.
2) A macro program for guidance drawing figures uses several
symbols, which are defined in SYMBOL.DEF. The following
are some common symbols:
Symbol Description
cursor #6011
Current cursor position
The symbol is set by the system.
guide_frequency #6013
How many times the guidance drawing
figure macro is started
First time = first_time (1)
Second time = second_time (2)
The symbol is set by the system.
previous_cursor #10060
Previous cursor position
The symbol is set by the macro.
It is initialized in PROC*.SRC and set in
FIG*.SRC.
call M98P
fig_clear 6000
Number of the program for initializing the
guidance drawing figure display area
Example)
To display one guidance drawing figure at prompts 1 and 2, and
to display another at prompt 3
Display guidance
drawing figure 1.
Prompt 1 A=
Prompt 2 B=
Prompt 3 C=
Display guidance
drawing figure 3.