
13. PMC CUSTOMIZING TOOLS USER PROGRAM B-63423EN/02
-82-
13.6 SIGNAL FOR ISO / GUIDE SCREEN CHANGING
ISO screen means the programming screen in which conventional
command codes such as G-code are used. On the other hand, GUIDE
screen means the operating screen in which particular functions such
as Cycle motions / Guidance machining of MANUAL GUIDE are
used.
In order to change these ISO / GUIDE screen, a switch (or signal) is
prepared.
NOTE
In order to avoid unexpected problem at changing
between ISO / GUIDANCE screen, please make
PMC program to turn on External Reset signal at
changing this switch
PMC Signal for ISO/GUIDE Changing
G62.4(PDT1) = 0 : Select ISO programming screen
= 1 : Select GUIDE screen