
3.USEFUL FUNCTIONS FOR MACHINING PROCESSES SUPPLEMENT B-63344EN/02
- 188 -
3.2 SUPPORT OF BACK TOOL POST LATHES
The MANUAL GUIDE supports a flatbed manual lathe, of which tool
post is located between the workpiece and operator, in principle.
By using the "back tool post lathe support function" (option function),
the MANUAL GUIDE can also be used for a slant-bed lathe, of which
tool post is located beyond the workpiece viewed from the operator.
Tool post
O
erato
Workpiece
Tool post
O
erato
Workpiece
Ordinar
MANUAL GUIDE
MANUAL GUIDE which supports
back tool post lathes
NOTE
When this option function is installed, set the
following parameters because the upward direction
on the screen indicates the positive X direction in
the coordinate system for the lathe:
Bit 5 (SRV) of parameter No. 9761 = 0 (The soft-
key icon points up.)
Parameter No. 6510 = 14 (The upward direction on
the screen indicates the positive X direction in the
coordinate system of animated drawing.)
When this option is installed, all guidance drawings on the MANUAL
GUIDE screen and input figures in the graphic window are displayed
top side down to match the direction of the X-axis of the actual
machine.