
2.STANDARD OPERATION B-63924EN/01
- 94 -
2.3.5.5 Cutting character strings from an MDI program
Selected character strings can be cut from the MDI program being
edited.
Procedure
1 If the [MDI Program] screen is currently not displayed, display
the [MDI Program] screen as described in Subsection 2.3.5,
"Editing an MDI Program".
2 Press the display/operation switching key
to display the
operation keys.
3 Select a cutting range.
When using a pointing device such as a mouse, select a cutting
range by dragging the pointing device. When using the
keyboard, select a cutting range by using the [Shift] key (or
[SHIFT] key on the MDI panel) + cursor keys.
4 Press the operation key
, the [Delete] key on the
keyboard, or the [DELETE] key on the MDI panel to cut the
selected range.
2.3.5.6 Copying character strings from an MDI program
Selected character strings can be copied from the MDI program being
edited.
Procedure
1 If the [MDI Program] screen is currently not displayed, display
the [MDI Program] screen as described in Subsection 2.3.5,
"Editing an MDI Program".
2 Press the display/operation switching key
to display the
operation keys.
3 Select a copy range.
When using a pointing device such as a mouse, select a copy
range by dragging the pointing device. When using the
keyboard, select a copy range by using the [Shift] key (or
[SHIFT] key on the MDI panel) + cursor keys.
4 Press the operation key
to copy the selected range.
No change is made to the screen display.