
B-63924EN/01 3.CUSTOMIZATION
- 223 -
• Mode keys
The <POSITION>, <PROGRAM>, <SETTING>, <SYSTEM>,
and <MESSAGE> buttons on the MDI panel of the CNC are
called mode keys. A set of functions assigned to these buttons
is known as “mode”. They correspond to numeric keys 1 to 5
on the numeric key pad of the PC. This item allows you to
specify what part of the navigation definition file is to be
executed when one of these keys is pressed. The mode keys
and numeric keys are associated as listed below.
POSITION key 1 (numeric key)
PROGRAM key 2 (numeric key)
SETTING key 3 (numeric key)
SYSTEM key 4 (numeric key)
MESSAGE key 5 (numeric key)
- File
This item allows you to specify a navigation definition file.
- ConfDef
This item allows you to specify the ConfDef name of the
navigation definition file for the key control to which the
mode is assigned. This information becomes that part of
the navigation definition file which specifies the way key
control buttons are arranged.
- ColPart
This item allows you to specify the colpart name in the
above mentioned ConfDef in the navigation definition file
corresponding to the key control to which the mode is
assigned. This information becomes that part of the
navigation definition file which indicates the set of buttons
in the specified key control.
- FuncDef
This item allows you to specify the Funcdef name of the
navigation definition file defining the display and action of
the mode. This information becomes that part of the
navigation definition file which specifies the action of a
button in the set of the buttons in the specified key control.
- KeyCtrl and Buttons
These items allow you to specify a key control number (0 o
3) to which the mode is assigned and which button (the
index attribute value, a button element) has been clicked.
These button numbers exclude the select (selbtn) button
from the specified button group.
This way, these items are used to specify the items in the navigation
definition file. For details, see Section 3.4,
“OPERATION-RELATED CUSTOMIZATION”.