
2.STANDARD OPERATION B-63924EN/01
- 52 -
2.3.1.2 Searching for a sequence number
The currently selected NC program can be searched for a specified
sequence number.
NOTE
Before a search can be made for a sequence
number, the sequence number must be inserted
in the NC program.
Moreover, set the following status:
• Operation
- MEMORY mode, or
- Stopped in REMOTE mode
Procedure
1 If the [Program Check] screen is currently not displayed, display
the [Program Check] screen as described in Subsection 2.3.1,
"Checking the NC Program Currently Being Executed".
2 Press the display/operation switching key
to display the
operation keys.
3 Press the operation key
to display the [Program Check
- Sequence Number Search] screen.
4 Enter a search target sequence number then click the <OK>
button.
5 The cursor moves to the specified sequence number.
NOTE
If the NC program does not include a specified
sequence number, the PS060 (SEQUENCE
NUMBER NOT FOUND) alarm is issued.