
B-63924EN/01 2.STANDARD OPERATION
- 37 -
2.2 POSITION DISPLAY
This section describes how to display positions such as the current
position of the CNC.
2.2.1 Overall Position Display
The overall positions (relative position, absolute position, machine
position, and distance to go) of the CNC are displayed. Modal
information (such as G codes) and actual speed information (actual
feedrate and spindle speed) are displayed at the same time.
This screen can be displayed by pressing the [POSITION] function
key and [ALL] submenu key.
This screen allows you to reset and preset relative coordinates, set the
floating reference position, and preset the workpiece coordinate
system.
For details of each function, see the following:
• Resetting relative coordinates
→ Subsection 2.2.3.1, "Resetting relative coordinates"
• Presetting relative coordinates
→ Subsection 2.2.3.2, "Presetting relative coordinates"
• Setting the floating reference position
→ Subsection 2.2.3.3, "Setting the machine position to the
floating reference position"
• Presetting the workpiece coordinate system
→ Subsection 2.2.3.4, "Presetting the workpiece coordinate
system"