
B-64663EN/01 LASER FUNCTION 8.CONTROL FUNCTION
- 169 -
Signal
- Optical path length compensation start signal
LRCS<G224#0>
[Classification] Input signal
[Function] Starts optical path length compensation.
[Operation] Optical path length compensation begins when the optical path length
compensation start signal (LRCS) is set to "1" with all axes at the
reference position. If an axis on which the optical path length changes
moves, the U-axis (optical path length adjustment axis) moves in order
to cancel the change in optical path length and resume the original
optical path length.
- Optical path length compensation signal
LCIN<F223#0>
[Classification] Output signal
[Function] Informs the PMC that optical path length compensation is under way.
[Output condition] This signal becomes “1” when:
- Optical path length compensation begins.
This signal becomes “0” when:
- The optical path length compensation start signal (LRCS)
becomes "0".
- The optical path length compensation stop request signal (CSTP)
becomes "1".
- Optical path length compensation stop request signal
CSTP<F223#1>
[Classification] Output signal
[Function] Informs the PMC that optical path length compensation cannot
continue.
[Output condition] This signal becomes “1” when:
- An emergency stop, servo-off, or U-axis overtravel occurs.
This signal becomes “0” when:
- The cause of the stop request is removed, and the optical path
length compensation start signal (LRCS) is acceptable.
Signal address
#7 #6 #5 #4 #3 #2 #1 #0
G224 LRCS
F223 CSTP LCIN