
5.LASER OUTPUT CONTROL LASER FUNCTION B-64663EN/01
- 76 -
5.3.3 Duty Override
Overview
When the C-series or Y-series oscillator is being used, the currently
set laser output pulse duty can be overridden.
Signal
- Duty override signals
*DU1 to *DU16<G220#0 to #4>
[Classification] Input signal
[Function] Overrides the currently set pulse duty ratio of the laser oscillator.
[Operation] When the C-series or Y-series oscillator is used, the duty override
signals (*DU1 to *DU16) can be used to override the current pulse
duty ratio of the laser oscillator.
The override value can be specified within a range of 0% to 150%, in
units of 10%. Note that specifying an override value of 0% makes the
duty ratio 0%, resulting in the beam off state.
Signal Override
%
*DU16 *DU8 *DU4 *DU2 *DU1
0 1 1 1 1 1
10 1 1 1 1 0
20 1 1 1 0 1
30 1 1 1 0 0
40 1 1 0 1 1
50 1 1 0 1 0
60 1 1 0 0 1
70 1 1 0 0 0
80 1 0 1 1 1
90 1 0 1 1 0
100 1 0 1 0 1
110 1 0 1 0 0
120 1 0 0 1 1
130 1 0 0 1 0
140 1 0 0 0 1
150 1 0 0 0 0
Signal address
#7 #6 #5 #4 #3 #2 #1 #0
G220 *DU16 *DU8 *DU4 *DU2 *DU1
NOTE
During high-speed piercing, this function is
disabled.