
5.POWER SUPPLY HARDWARE B-64663EN/01
- 16 -
5.1 CONTROL UNIT POWER SUPPLY
Supply power (24 VDC) from an external source to the control unit of
the Series 16i-LB/160i-LB system. Install an external power-on/off
switch for the control unit, as shown in the figure below. When the
Series 160i-LB system with PC functions is used, apply
countermeasures to guard against possible destruction of the data on
the hard disk due to a momentary power failure; for example, install
an uninterruptible power supply. The power rating is equal to the sum
of the capacity of the control unit (total power consumption in the unit
plus a margin of about 20% to 30%) and the output via the control
unit (output from CP1B).