
B-64663EN/01 LASER FUNCTION 8.CONTROL FUNCTION
- 223 -
Name Function
Helical interpolation (G02, G03)
○ (Circular interpolation plus max. 2
axes linear interpolation)
If the helical interpolation option is
provided, linear interpolation can be
performed on up to two axes. The
specified feedrate must include the
speed on the helical axis.
Conical/spiral interpolation (G02,
G03)
×
Exponential interpolation (G02.3,
G03.3)
×
Dwell (G04)
○ (Specified in seconds.)
Polar coordinate interpolation
(G12.1, G13.1)
×
Cylindrical interpolation (G07.1)
×
Skip function (G31)
○ *
Reference position return (G28)
○ If the zero point is not established,
P/S alarm No. 090 is raised. *
Reference position return check
(G27)
○ *
Second, third, and fourth reference
position returns (G30)
○ *
Floating reference position return
(G30.1)
○ *
Normal direction control (G41.1,
G42.1)
×
Absolute command (G90)/
incremental command (G91)
○
Feed functions ○: Specifiable ×: Not specifiable
Name Function
240 m/min (0.01 mm) max. Rapid traverse rate
100 m/min (0.0001 mm) max.
Rapid traverse rate override F0, 25, 50, 100%
1% rapid traverse rate override 0 to 100 %
Feed per minute
○
Rapid traverse bell-shaped
acceleration/deceleration
×
Linear acceleration/deceleration
before cutting feed interpolation
○ (Look-ahead of up to 40 blocks)
Feedrate override 0 to 254 %
Second feedrate override
×
One-digit F code feed
×
Inverse time feed (G93)
×
External deceleration
○
Tool compensation functions ○: Specifiable ×: Not specifiable
Name Function
Cutter compensation C (G40, G41,
G42)
○