
2.FUNCTIONS DIFFERING FROM THE M SERIES SPECIFICATIONS LASER FUNCTION B-64663EN/01
- 40 -
2.3 TEST OPERATION
2.3.1 Machine Lock
Difference
When beam output is programmed, all commands relating to beam
output are ignored. Instead, only machine move commands are
executed (the beam remains off) and the current position indication is
updated.
When piercing command G24 is executed, no beam is output. In this
case, that block may be skipped with no operation performed. Or, a
dwell may be performed. Either option can be selected with a
parameter.
Parameter
#7 #6 #5 #4 #3 #2 #1 #0
15001 PES
[Data type] Bit
PES Specifies how a piercing command (G24) is to be treated when the
machine lock or dry run is set to ON.
0: Dwell is performed.
1: The block of the piercing command is skipped.
2.3.2 Dry Run
Difference
When beam output is programmed, all commands relating to beam
output are ignored. Instead, only machine move commands are
executed by means of dry run. The beam remains off.
When piercing command G24 is executed, no beam is output. In this
case, that block may be skipped with no operation performed. Or, a
dwell may be performed. Either option can be selected with a
parameter.
Parameter
#7 #6 #5 #4 #3 #2 #1 #0
15001 PES
[Data type] Bit
PES Specifies how a piercing command (G24) is to be treated when the
machine lock or dry run is set to ON.
0: Dwell is performed.
1: The block of the piercing command is skipped.