
B-64663EN/01 LASER FUNCTION 8.CONTROL FUNCTION
- 213 -
15097
Parameter for calculating the rate of change in output (Output when feedrate
F is 0)
[Unit of data] W
[Valid data range] 0 to 7000
This parameter specifies the power when feedrate F is 0. The rate of
change in output is calculated from this setting and the programmed
output in power control mode Mc.
15098
Parameter for calculating the rate of change in frequency (Frequency when
feedrate F is 0)
[Unit of data] Hz
[Valid data range] 5 to 2000
This parameter specifies the frequency when feedrate F is 0. The rate
of change in frequency is calculated from this setting and the
programmed frequency in power control mode Mc.
15099
Parameter for calculating the rate of change in the duty ratio (Duty ratio
when feedrate F is 0)
[Unit of data] %
[Valid data range] 0 to 100
This parameter specifies the duty ratio when the feedrate F of Mo is 0.
The rate of change in the duty ratio is calculated from this setting and
the programmed duty ratio in power control mode Mc.
15450 Allowable variation in power control speed (2)
[Unit of data] mm/min
[Valid data range] 0 to 32767
When this parameter is 0, parameter No. 15095 is valid. The setting
range of this parameter is different from that of parameter No. 15095.
For details on the settings, see descriptions of parameter No. 15095.
NOTE
1 To use the laser power control function in
high-precision contour control (HPCC) mode,
select laser power control mode before selecting
high-precision contour control mode. To cancel
laser power control mode, do so after canceling
high-precision contour control mode.
2 The laser power control function cannot be used
together with the pulse enhanced function. In
power control mode, the pulse enhanced function
is disabled.
3 The laser power control function can be used only
for linear axes. The laser power control function
cannot be used with the cylindrical interpolation
function or other functions related to a rotation axis.
4 The laser power control function cannot be used
together with a function related to
three-dimensional machining.