
B-64663EN/01 HARDWARE 7.LASER OSCILLATOR
- 23 -
CAUTION
1 To daisy-chain I/O units to a single I/O link, both
optical fiber cables and electrical cables can be
used.
2 When an optical fiber cable is used, an optical I/O
link adaptor must also be used.
3 Two types of optical I/O link adaptors are
supported: Standard and high-speed.
4 When four or more optical fiber cables are used
(that is, when four or more connections are
established), the cables should be of high-speed
type.
5 Each laser oscillator contains a standard type
adaptor. To establish a connection to the laser
oscillator, therefore, an I/O unit must be provided
with a standard type I/O link adaptor, because only
adaptors of the same type can be connected to
each other.
For an explanation of FANUC I/O link connection using electrical
cables, or the outside dimensions of optical I/O link adaptors, refer to
Chapter 9, "FANUC I/O Link Connection," in the "Series
16i-MODEL B Connection Manual (Hardware) (B-63523EN)."