PREFACE
B–63503EN–1/01
p–2
Relation of interface signals among the CNC, the PMC and the machine
tool is shown below:
CNC PMC MT
Built in I/O
(Basic)
FANUC
I/O Link
(Optional)
G000 or later
F000 or later
X1000 or
later
X000 or
later
Y1000 or
later
Y000 or
later
Machine
tool
NOTE
For the signals, a single data number is assigned to 8 bits.
Each bit has a different meaning.
One address accommodates eight signals.
#7 #6 #5 #4 #3 #2 #1 #0
OPF000 SA STL SPL RWD
Symbol (#0 to #7 indicates bit position)Address
In an item where both T series and M series are described, some signals
are covered with shade ( ) in the signal address figure as shown
below. This means either T series or M series does not have this signal.
Upper part is for T series and lower part is for M series.
[Example 1]
Signal EXLM, ST is a common signal, STLK is for T series only and
RLSOT and RVS are for M series only.
T series
M series
STLKRLSOT
#0#7
G007
#6
EXLM
#2
ST
#1
Signal description
D Expression of signals