Arrow keys on the MDI panel
789
654
123
12. DISPLAY/SET/EDIT
B–63503EN–1/01
638
OP7 Feed hold on software operator’s panel
0 : Not performed
1 : Performed
7210 Jog–movement axis and its direction on software operator’s panel “↑”
7211 Jog–movement axis and its direction on software operator’s panel “↓”
7212 Jog–movement axis and its direction on software operator’s panel “→”
7213 Jog–movement axis and its direction on software operator’s panel “←”
7214 Jog–movement axis and its direction on software operator’s panel “ ”
7215 Jog–movement axis and its direction on software operator’s panel “ ”
7216 Jog–movement axis and its direction on software operator’s panel “ ”
7217 Jog–movement axis and its direction on software operator’s panel “ ”
[Data type] Byte
[Valid data range] 0 to 8
On software operator’s panel, set a feed axis corresponding to an arrow
key on the MDI panel when jog feed is performed.
Set value Feed axis and direction
0 Not moved
1 First axis, positive direction
2 First axis, negative direction
3 Second axis, positive direction
4 Second axis, negative direction
5 Third axis, positive direction
6 Third axis, negative direction
7 Fourth axis, positive direction
8 Fourth axis, negative direction