B–63503EN–1/01
15. PMC CONTROL FUNCTION
767
[Classification] Output signal
[Function] The signal reports that the control unit has finished reading the entered
data.
[Operation] The output condition and procedure are described in the “basic
procedure.”
[Classification] Output signal
[Function] The signal reports that program number search, specified by external data
input, has been completed.
[Output condition] The signal is set to “1” when:
The program number search specified by external data input is completed.
The signal is set to “0” when:
· An automatic operation is started.
· A reset occurs.
#7 #6 #5 #4 #3 #2 #1 #0
G000
G001
G002
ED7 ED6 ED5 ED4 ED3 ED2 ED1 ED0
ED15 ED14 ED13 ED12 ED11 ED10 ED9 ED8
ESTB EA6 EA5 EA4 EA3 EA2 EA1 EA0
F060
ESEND EREND
#7 #6 #5 #4 #3 #2 #1 #0
Read completion signal
for external data input
EREND <F060#0>
Search completion
signal for external data
input ESEND <F060#1>
Signal address