B–63010EN/02
4. DESCRIPTION OF PARAMETERS
119
S Example of axis configuration and parameter settings when the simple
electronic gearbox (EGB) function is used
(EGB workpiece axes: A axis, EGB axis, B axis (Parameter No.7771=5))
M1
2
3
6
4
5
M2 7
8
1
1
2
16
4
5
48
3
0
Y
A
(M1)
Z
C
(M2)
(Dummy)
X
9
10
40
40
(None)
(None)
Note) M1/M2: First pulse module/second pulse module
CNC
Controlled
axis
number
1
2
3
4
5
6
Program
axis name
No.1020
X
Y
Z
A
B
C
Servo axis
number
No.1023
1
2
3
4
5
6
Slave
number
ATR
No.1910
to 1919
Axis
2–axis
amplifier
2–axis
amplifier
1–axis
amplifier
1920 Controlled axis number for slave 1 (dedicated to the FSSB setting screen)
1921 Controlled axis number for slave 2 (dedicated to the FSSB setting screen)
1922 Controlled axis number for slave 3 (dedicated to the FSSB setting screen)
1923 Controlled axis number for slave 4 (dedicated to the FSSB setting screen)
1924 Controlled axis number for slave 5 (dedicated to the FSSB setting screen)
1925 Controlled axis number for slave 6 (dedicated to the FSSB setting screen)
1926 Controlled axis number for slave 7 (dedicated to the FSSB setting screen)
1927 Controlled axis number for slave 8 (dedicated to the FSSB setting screen)
1928 Controlled axis number for slave 9 (dedicated to the FSSB setting screen)
1929 Controlled axis number for slave 10 (dedicated to the FSSB setting screen)
NOTE
After these parameters have been set, the power must be
turned off then back on for the settings to become effective.
[Data type] Byte
[Valid data range] 0 to 8
These parameters are used to set the controlled axis numbers for slaves 1
to 10.
NOTE
These parameters are set using the FSSB setting screen.
So, these parameters should not normally have to be
specified directly. These parameters need not be set in
FSSB manual setting mode.