B–63010EN/02
4. DESCRIPTION OF PARAMETERS
429
8191
F0 velocity of rapid traverse override of an axis under superimposed control
[Data type] Word axis
Valid data range
ncremen
sys
em
n
o
a
a
IS-A, IS-B IS-C
Millimeter machine 1 mm/min 6 to 15000 6 to 12000
Inch machine 0.1 inch/min 6 to 6000 6 to 4800
Rotaion axis 1 deg/min 6 to 15000 6 to 12000
This parameter specifies the maximum cutting feedrate for an axis under
superimposed control.
8192
Linear acceleration/deceleration time constant in rapid traverse of an axis under
superimposed control
[Data type] Word axis
[Unit of data] ms
[Valid range] 0 to 4000
This parameter specifies the linear acceleration/deceleration time
constant in rapid traverse for each of the axes (master and slave axes)
under superimposed control.
8193
Maximum cutting feedrate under superimposed control
[Data type] 2 words
[Unit of data and valid range]
Valid range
ncremen
sys
em
n
o
a
a
IS-A, IS-B IS-C
Millimeter machine 1 mm/min 30 to 240000 30 to 100000
Inch machine 0.1 inch/min 30 to 96000 30 to 48000
Rotaion axis 1 deg/min 30 to 240000 30 to 100000
This parameter specifies the maximum cutting feedrate under
superimposed control.
[Unit of data]
[Valid data range]