B–63010EN/02
4. DESCRIPTION OF PARAMETERS
225
No. Parameters for low–speed characteristics when the output switch function is used
on the SUB spindle side if the spindle switch function is provided
(No.4284 to 4351)
Data type
4325 Word Motor deceleration time constant (SUB/LOW)
4326 Word Deceleration time constant limit start speed (MAIN/HIGH)
4327 Word Deceleration time constant limit start speed (SUB/HIGH)
4328 Word Position coder–based spindle orientation command multiplication (MAIN)
4329 Word Position coder–based spindle orientation command multiplication (SUB)
4330 Word Deceleration time constant limit start speed (MAIN/LOW)
4331 Word Deceleration time constant limit start speed (SUB/LOW)
4332 Word
4333 Word
4334 Word Number of arbitrary pulses of speed detector (MAIN)
4335 Word Number of arbitrary pulses of speed detector (SUB)
4336 Word Change point for spindle synchronous acceleration/deceleration time constant
4337 Word Velocity compensation factor for velocity loop gain (MAIN)
4338 Word Velocity compensation factor for velocity loop gain (SUB)
4339 Word Torque clamp level
4340 Word Bell–shaped acceleration/deceleration time constant for spindle synchronization
4341 Word Abnormal load detection level
4342 Word
4343 Word
4344 Word Look–ahead feed forward coefficient
4345 Word Spindle motor speed command detection level
4346 Word Incomplete integral coefficient
4347 Word Detection level for spindle 1–to–2 speed difference at slave operation
4348 Word Overload current alarm detection level (for low–speed characteristics)
4349 Word Overload current alarm detection time constant
4350 Word Overload current alarm detection level (for high–speed characteristics)
4351 Word Compensation for current detection offset
No. Data type Parameters for the MAIN spindle when the spindle is switched and the like
(No.4352 to 4372)
4352 Bit Bit parameter
4353 Bit Bit parameter
4354 Word
4355 Word MZ sensor signal amplitude ratio compensation
4356 Word MZ sensor signal phase difference compensation
4357 Word BZ sensor signal amplitude ratio compensation
4358 Word BZ sensor signal phase difference compensation
4359 Word
4360 Word
4361 Word Number of arbitrary pulses of position detector
4362 Word