
12. DIRECT OPERATION FOR
MACHINING PROGRAMS
CREATED CONVERSATIONALLY
B–63284EN/03
OPERATION
152
(2) Setting screen prior to execution when bit 1 (PRD) of parameter No.
9775 is set to 1
FACE POSITION CZ : Z–axis coordinate of a workpiece end face
when the workpiece shift amount is
measured by butting a tool against the end
face
W–SHIFT SZ : A workpiece shift amount difference can be
automatically entered by butting the tool
specified by a T code against a workpiece
end face and pressing [SET].
NOTE
1 Press [HEAD–R] to set the data for tool post 2.
2 End removal, chuck number, chuck barrier, and tailstock
data for tool post 2 cannot be set.
(3) Chuck barrier data when the optional chuck/tailstock barrier
function is selected
When the cursor is positioned to CHUCK ID NO. or CHUCK
BARRIER on the setting screen, before execution, the following
soft keys are displayed:
By pressing [BARRI CHUCK], chuck barrier data is displayed in the
window. This chuck barrier data is identical to that for the same option
on the NC side.
By entering a chuck number on the setting screen before execution, chuck
barrier data is automatically determined and displayed in the window.