
B–63284EN/03
6. DATA I/O USING THE
MEMORY CARD
ADDITIONAL FUNCTIONS OF SERIES
BH0M/BH1D/BH2D, BH1E/BH2E/BH3E,
AND BH1F/BH2F/BH3F
579
The input/output of conversational program data and tool data can be
performed using the memory card. The input/output method of each type
of data is the same as the method of using the conventional reader/punch
interface.
NOTE
This function cannot be used with some series and editions
of the software and CNC system. If the function cannot be
used, set the IO4 bit (bit 7 of parameter No. 2700) to 0.
On the basic menu screen (with tool post 1 selected for a 2–path system),
press [2] (machining program editing, copy, deletion, read, punch) to
display the registered program directory screen for editing.
After switching to EDIT mode, enter the machining program number to
be output, using the numeric keys. Alternatively, after switching to EDIT
mode, move the cursor to the machining program, then press [PUNCH].
Then, the soft keys for operation confirmation appear as shown below.
Pressing [EXEC] starts the punching of the specified program. A file to
be registered is punched under the file name CAPO****.DAT (with ****
representing a specified program number) immediately after the
previously registered files.
Pressing [CANCEL] cancels punch operation to return to the previous
screen. To output all machining programs, specify the program number
–9999. At this time, the programs are output to file CAPALLPR.DAT.
6.2
DETAILS
6.2.1
Punching Machining
Programs