
7. CHECKING MACHINING PROGRAMS
B–63284EN/03
OPERATION
80
(1) Enlarging a figure
While the soft keys, described in the previous section, are displayed,
press the [+] key. The [ENLARG] key is displayed.
Press the [ENLARG] soft key. The following soft keys are
displayed. The coordinates of the screen center and scale
magnification are also displayed on the left–hand side of the screen.
Coordinates of the
screen center
Scale magnification
↑
←
→
↓
CURSOR KEYS
[EXEC] : Draws the figure with the new scale magnification
and the new coordinates of the screen center.
[CAN] : Cancels the scale magnification and the
coordinates of the screen center, modified on this
screen.
[SCAL↓] : Reduces the scale magnification.
[SCAL↑] : Increases the scale magnification.
[NORMAL] : Sets the scale magnification and coordinates of the
screen center to the standard values and draws the
figure by applying these standard values.
Cursor keys ↑↓←→: Move the screen center.
7.2.3
Enlarging a Figure and
Displaying Other
Screens