
B–63284EN/03
12. DIRECT OPERATION FOR
MACHINING PROGRAMS
CREATED CONVERSATIONALLY
OPERATION
157
T–CODE: T code for tool
When the T code value of a tool is rewritten, the
T code value of the same tool in the current ma-
chining program is also modified automatically.
Furthermore, the T code in the tool file is also
modified at the same time.
When [Y–AXIS OFFSET] is pressed, Y–axis geometry/wear compensa-
tion values are displayed. These values are the same as for the NC. When
the Y–axis conversational function is not supported, this soft key is not
displayed.
When [WEAR OFFSET] is pressed, X–axis/Z–axis wear compensation
values are displayed. These values are the same as for the NC. Enter these
values manually in the same way as for the tool offset screen.
Before attempting to execute a machining program, attach the tools to be
used to the turret of the machine by checking the tooling data screen.
Usually, attach the tools according to the displayed T–code tool numbers.
Even if a tool is attached to a different turret, the corresponding T code
in the program can be automatically rewritten simply by rewriting the
specified T code on the tooling data screen.
By pressing [RETURN], the user can display the original screen.
When [TOOL DISPLY] is pressed, a tool data screen like that shown
below appears in the window. At the same time, the tool figure is also
drawn in the same window.