
A. PARAMETERS
B–63284EN/03
APPENDIX
712
MLT 1 : When the cutter revolves in the normal or reverse direction around the
milling axis, specified M codes are output.
<Related parameters: No. 9877 (MLNMLN) and 9878 (MLSTPM)>
0 : When the cutter revolves in the normal or reverse direction around the
milling axis, M03 or M04 is output.
28O 1 : The program is terminated without executing T0 and G28 at the end of
the program.
0 : The program is terminated after executing T0 and G28 at the end of
the program.
M1O 1 : M01 is output after positioning at the tool changing position at the end
of each process.
0 : M01 is not output after positioning at the tool changing position at the
end of each process.
T0O 1 : Outputs T0 immediately before positioning to the tool–change
position.
0 : T0; is not output immediately before a return to the tool–change
position (G30).
GPW 1 : The drawing screen is displayed when the first graphic screen is
selected after turning on the power.
0 : The graphic parameter screen is displayed when the first graphic
screen is selected after turning on the power.
D Set this parameter to 1.
AUT 1 : In the automatic selection of a tool under the automatic determination
of maching conditions, the tool having the smallest tool management
number is automatically selected.
0 : In the automatic selection of a tool under the automatic determination
of machining conditions, the tool that minimizes the cutting time is
automatically selected.
#7
LOD9775
#6
RVX
#5 #4
CRS
#3
THT
#2
IGT
#1
PRD
#0
IGM
IGM 1 : In tooling, the tooling data is unconditionally created with T codes
specified in the program. The T codes specified in the tool file are
automatically rewritten.
0 : In tooling, the tooling data is not created if the T codes specified in the
tool file do not agree with those in the program. In this case, the
machining program cannot be executed.
PRD 1 : On the setting screen before execution, a workpiece shift along the
Z–axis is specified by bringing the tool in touch with the end face of
the workpiece.
0 : On the setting screen before execution, a workpiece shift along the
Z–axis is specified by entering the difference between the desired
value and the current value.
IGT 1 : A tool is not automatically determined.
0 : A tool is automatically determined.