
B–63284EN/03
13. SETTING DATA
OPERATION
207
: Specify when a tool is registered.
: Specify by pressing the [HEAD–L] or
[HEAD–R] soft key.
NOTE
This is effective only for the two–/three–path lathes.
: Specify by pressing the [FACE] or [CROSS]
soft key.
(1) Reamer for end faces (2) Reamer for side faces
: Specify by pressing one of the [TURN],
[MILLNG], and [COMMON] soft keys.
[MILLNG] : Milling tools for C–axis/Y–axis
machining
[TURN] : Tools for turning
[COMMON] : Tools that are used for both
milling and turning
:T–code to be output when a machining program
is executed (T4 digits/T6 digits)
: Direction in which a rotating tool rotates during
cutting
Specify by pressing the [NORMAL] or
[REVERS] soft key.
: Nominal diameter of a reamer
: Effective length of a reamer
TL
DD
: Specify by pressing one of the [CARBID],
[HI–SPD], and [SPCIAL] soft keys.
TOOL TYPE
Tool post selection
TOOL DIREC
MILLNG/TRN
OUTPUT T
REVOLUT.–D
NOM.–D/WID (DD
)
CUTTR LNG (TL)
TL MATRIAL (TM)