
B–63284EN/03
1. THREE–PATH COMPLEX
LATHE FUNCTION
ADDITIONAL FUNCTIONS OF SERIES
BH1E/BH2E/BH3E AND BH1F/BH2F/BH3F
646
27122 CUTOV3
CUTOV3 Percentage of the actual depth of cut to the depth of cut programmed in
each process in tool post 3. If 0 is set, 100% is assumed.
Setting range: 0 to 200 Unit: %
9791 CAXIS1
CAXIS1 A machining menu for tool post 1 is specified.
0 : The C–axis machining and Y–axis machining menus are not
displayed.
1:C–axis drilling and C–axis grooving (for regular grooves on side
faces only) are enabled.
2:C–axis drilling and C–axis grooving are enabled.
3:C–axis drilling, C–axis grooving, and C–axis notching are enabled.
4:C–axis drilling, C–axis grooving, and C–axis cylindrical machining
are enabled.
5:C–axis drilling, C–axis grooving, C–axis notching, and C–axis
cylindrical machining are enabled.
6:Y–axis machining is enabled.
7:C–axis drilling, C–axis grooving (for regular grooves on side faces
only), and Y–axis machining are enabled.
8:C–axis drilling, C–axis grooving, and Y–axis machining are enabled.
9:C–axis drilling, C–axis grooving, C–axis notching, and Y–axis
machining are enabled.
10: C–axis drilling, C–axis grooving, C–axis cylindrical machining, and
Y–axis machining are enabled.
11: C–axis drilling, C–axis grooving, C–axis notching, C–axis
cylindrical machining, and Y–axis machining are enabled.
9792 CAXIS2
CAXIS2 A machining menu for tool post 2 is specified. (The specifiable items are
the same as for parameter No. 9791.)
27120 CAXIS3
CAXIS3 A machining menu for tool post 3 is specified. (The specifiable items are
the same as for parameter No. 9791.)
9793 TLPOSX
TLPOSX X coordinate value of the turret turning position on the pre–execution
setting screen.
This data is automatically set as the initial value. If the parameter is set
to 0, no data is set automatically.