
B–63284EN/03
4. AXIS DISPLAY FUNCTION
ON THE ANIMATED
GRAPHIC SCREEN
ADDITIONAL FUNCTIONS OF SERIES
BH1E/BH2E/BH3E AND BH1F/BH2F/BH3F
670
This function is enabled when the following parameter is set:
27125 ANMADX
When an arbitrary axis number is set in parameter No. 27125, an absolute
position for the axis is displayed on the animated graphic screen. If 0 is
set, the absolute position for one axis is not displayed on the animated
graphic screen.
Setting range: 0 to (the maximum number of controlled axes for each path)
NOTE
This parameter is set for each axis.
With bit 6 (DAK) of parameter No. 3106, either the program coordinate
system or workpiece coordinate system can be selected as the coordinate
system used to display absolute positions (absolute coordinates) during
three–dimensional coordinate conversion. For details, refer to the
specifications on the three–dimensional coordinate conversion function
of the NC.
4.3
PARAMETER