
B–63284EN/03
13. SETTING DATA
OPERATION
199
(1) Drilling an end face
(turning or C–axis machining,
Y–axis machining)
(2) Drilling an side face
(C–axis machining,
Y–axis machining)
[CROSS]
: Specify by pressing one of the [TURN],
[MILLNG], and [COMMON] soft keys.
:T–code to be output when a machining program
is executed (T4 digits/T6 digits)
: Direction in which a spindle or rotating tool
rotates during cutting
Specify by pressing the [NORMAL] or
[REVERS] soft key.
: Nominal diameter of a center drill
: Diameter of the base of a center drill.
: Point angle of a center drill
: Effective length of a center drill
DD
CD
AC
DT
: Specify by pressing one of the [CARBID],
[HI–SPD], and [SPCIAL] soft keys.
MILLNG/TRN
OUTPUT T
REVOLUT.–D
NOMINAL DIA (DD)
MAX DIA (DT)
NOSE ANGLE (AC)
CUTTR LNGTH (CD)
TL MATRIAL (TM)