
13. SETTING DATA
B–63284EN/03
OPERATION
190
: Specify when a tool is registered.
(1) External thread (2) Internal thread
: Specify by pressing the [HEAD–L] or
[HEAD–R] soft key.
NOTE
This is effective only for the two–/three–path lathes.
:T–code to be output when a machining program
is executed (Four digits/six digits)
: Direction in which a spindle rotates during
cutting
Specify by pressing the [NORMAL] (= M03) or
[REVERS] (= M04) soft key.
: Need not be set.
: See the following figures.
AN
: Need to be set only when the figure of a tool
to be drawn is determined.
(1) External thread (2) Internal thread
TW
TW
: Specify by pressing one of the [CARBID],
[HI–SPD], and [SPCIAL] soft keys.
TOOL TYPE
Tool post selection
OUTPUT T
REVOLUT.–D
NOSE–RADI (RN)
NOSE–ANGLE (AN)
NOSE WIDTH (TW)
TL MATRIAL (TM)