
2. MACHINING PROGRAMS FOR
LATHES WITH C–AXIS
B–63284EN/03
TYPES OF MACHINING
PROGRAMS
424
TR
Approach start point
C–axis
Retracting end point
X–axis
Notch figure
RX
Tool radius
Machining start and end point
TR : Tool radius
TL : Effective tool length
RX : Cutting allowance along the X–axis
RZ : Cutting allowance along the Z–axis
RQ : Cutting width (%)
FX : Finishing allowance X
FZ : Finishing allowance Z
ZS : Start point Z
ZE : End point Z
ND : Nominal diameter of the chamfering tool
MD : Minor diameter of the chamfering tool
A : Chamfering tool angle
C : Chamfer amount
CZ : Chamfering tool position
CC : Clearance for the chamfering tool tip
Chamfering tool
End mill
ZE
TR
FX
FZ
RQ
ZS
TL
RX
C
MD
CZ CC
A
ND
RZ
(1) Machining in bites along the Z–axis is not performed in notching for
end faces.
(2) Tool nose radius compensation is used for machining in bites along
the X–axis in notching for end faces.
Number of cutting operations = CN = FUP ( (RX – FX) / (2*TR*RQ
/ 100))
Depth of cut = Q = ((RX – FX) / 2) / CN
First cutter compensation data
D
1
= TR + RX / 2 – Q
Second and subsequent cutter compensation data
D
n
= D
n
–
1
– Q
2.5.4
Details of C–axis
Notching