5. OPERATION
$ Select [END] on the input program specification screen or the output item selection
screen.
8 The screen display returns to the main menu screen.
(8) [LIST] command (F2 KEY)
It is the same function as “53.1 The List of source program”.
refer to above paragraph.
Note) If the step sequence function is selected when setting a model, the function for printing
a diagram according to a specified control statement (file with extension .#LS) is not
supported. The [LIST] command for creating a control statement is not included in the
displayed function key menu and cannot be executed.
(9) The note if the step sequence function is selected when setting a model
1) Net Numbers
When a ladder diagram is edited, net numbers starting from 1 are assigned to
subprograms. When a ladder diagram is printed, sequential numbers are assigned to all
subprograms in ascending order of subprogram numbers.
2) Cross Reference
A cross reference can only include information referenced by the ladder, first, second, or
third level, or by ladder subprograms. If ladder subprogram PO001 is referenced only by a
step sequence subprogram, and if address PO001 is specified to print the cross reference,
there is “no reference information.”
3) Printing the Step Sequence Diagram
The step sequence diagram cannot be printed.
l-93