5. OPERATION
Starting the utility
The utility must be started whenever data is input or output between the PMC and the
external equipment.
In the following example, the floppy disk containing external equipment input/output
software is assumed to be inserted in drive B.
To change drives
To change directories
To start the utility
The screen display
changes to the main
screen. (Main unit)
Procedure for Starting the Utility
FD Mate Main unit
A : >B *r ReturnJ
A
B:>
B : > CD UTILS I- Return J
B : UTILS/>
B : UTILS > FDUTILS r Return J
==
= Utility main = = =
____----___-______-_____________________----
1 : PMC-----HO/F0
2 : PMC-----Device
3 : HDIFD---Device
4 : spare
0 : Quit
Enter the desired menu number and press the RETURN key. The numbers correspond to
the following processing.
1: Transmits data between the PMC and the HDI’FD.
2: Transmits data between the PMC and the external equipment (connected through
RS-232-C).
3: Transmits data between the HDiFD and the external equipment (connected through
RS-232-C).
4: This function is not currently used.
0: Terminates the utility.
Numbers other than the above are not accepted.
If an incorrect number is entered, delete the number with the BS or DEL key and enter the
desired number.
1 - 13s