5. OPERATION
(i) F6 [SYMBOL]
Select whether output or not output the symbol 8 comment data to ROM format file.
HoweverJhe symbols which can not be displayed on CRTiMDl (7bytes or more symbols)
and the coil comments assigned to them never output to ROM format file.
1)
“YES”: (Default setting)
The symbols which can be displayed on CRT/MDl(Gbytes or less symbols) and the coil
comments assigned to them are output to ROM format file.
They can be displayed on CRT/MDI.
2)
"NO" :
No symbofcomment is converted to ROM format file.
Any symbol and comment is not displayed on CRTIMDI.
(ii) F7 [NETCMT]
If Net comment is used in ladder program, you can choose whether ‘Net comment pointer’
(Note2) is output to ROM format file or not.
1)
“POINTERS ONLY” : (Default setting)
To edit the ladder program by CNC built-in editor and decompile the data by FAPT
LADDER, select this setting.
However, ladder size gets larger because ‘Net comment pointer’ is output to ROM
format file.
2)
"NO" :
Any ‘Net comment pointer” is not output to ROM format file. In this case, ladder size in
the ROM format file is saved.
However, decompile the ROM format file makes its net comment data information lost.
Note 1)
This item is in effect for Source-format programs. At the compilation of FORMAT-B
source-program,this setting is ignored.
Note 2)
Net comment has its own character information only in a source program on the
personal computer.
Compiled ROM format file does not include any net comment characters.
Only ‘Net comment pointer’( =
information of net comment position.) can be
output to ROM format file as an functional instruction “NOP”.
This ‘Net comment pointer” helps to restore net comment date at decompiling the
ROM format file that is edited on CNC built-in editor and uploaded to FAPT
LADDER.
l-104